GM Electronics Ltd
.
Golden Mask Deep Hunter Pro AE
– Instruction manual
13
OPERATING NOTES:
1.
If, while searching, random disturbances or prolonged changes
of the frequency of the sound signal (false signals) appear, the
“SMART TUNE”
button must be pressed. This action can be
repeated several times to ensure complete elimination of the
interference and re-establish stabile operation. Reducing the signal
amplification
(
“SENSITIVITY”
control)
will
also
reduce
interferences.
2.
When switching
“Off”
the detector, the red LED
“Battery!”
will
be lit for a second or two. This does not indicate a battery problem.
Only when this LED lights-up when the detector is turned
“On”
(running), you should charge the battery.
3.
Do not use (or leave) the detector in a humid environment or in
wet bushes, snow and/or water
– the electronics unit and battery
block could be damaged as it is not sealed. When you connect the
coil to the electronic block, you should prevent the entry of dirt or
moisture in and around the contact pins of the connectors.
4.
Working with the detector in industrial areas and places with a
large amount of metal junk in the soil, and/or with presence of
industrial electromagnetic interferences, can lead to instability
and/or inability to work. This requires reducing the sensitivity of the
device with the
“SENSITIVITY”
knob, which will reduce the depth
of detection, but this will be the only way to achieve stability in such
conditions.
Summary of Contents for DEEP HUNTER Pro AE
Page 1: ...Instruction manual ...
