GM Electronics Ltd
.
Golden Mask Deep Hunter Pro AE
– Instruction manual
7
delivered in the form of “coil-cable loop” in length corresponding to
the respective size of the supporting frame and a set of PVC pipes
and fittings for assembling the supporting structure of the frame.
The “coil-cable loop” is composed of series-connected conductors
in a multi-conductor special cable which form a search coil. The
“coil-cable loop” is mounted onto a frame of PVC pipes, unions and
elbows attached to the PVC frame using the included “Velcro” cable
straps. The connecting cable is plugged into the connector labeled
“SEARCH COIL”
, which is mounted on the right edge of the front
panel of the electronics unit. The connector ring must be tightened.
The search with a “frame” requires an assistant who controls the
level horizontal movement of the frame, using the included belts.
With another belt, the operator determines the height and direction
of movement and controls the detector.
There are a another
way for individual work with a “frame” type
search coils, when the operator stands/walks inside the frame
holding both belts while controlling the detector.
WARNING!
Newer use such way to searching with Golden Mask Deep
Hunter Pro AE!
The use of this method, and/or any “entry” of the operator or
another assistant inside the “frame” coil of the Golden Mask
Deep Hunter Pro AE detector while in working mode, can
suffer adverse effects caused by the very strong
electromagnetic field that can lead to serious health problems
and/or injuries!
If you do not have an assistant, you can be
“dragging” of the search
coil on a non-metallic sled (PVC, for example) is recommended.
Summary of Contents for DEEP HUNTER Pro AE
Page 1: ...Instruction manual ...
