4
E-bike Shrinker User’s Guide
the charger will shows red, that means the charger is on working. When the LED
becomes green, it means the battery is fully charged. When you finished the
charge work, please first take off the charger’s plug from the e-power source,
and then depart the connector between the battery and the charger. Please do
not work on the opposite process.
During the charging work, the charger and the battery should be placed in a
stable place. The working temperature for the battery ranges between 0 and
45
℃。
The optimum working temperature ranges between 20
℃
and 25
℃。
Do not
place any cover on the battery or the charger in order to keep the battery
ventilation or cooling surrounding. Ensure that no liquids or metal filings diffuse
into the charger; if the battery box surface is founded too hot (higher than 60
℃
),
during the charging, that might suggest a malfunction. The e-power should be
cut off at once and the battery should be repaired in appointed service station.
4 Attention Details During Your Riding
During the pedal assistant riding, no need to turn off
the power switch, keep the switch on, you will feel
free as just riding a normal bicycle.
Before riding, you can loose quick release ②,
adjust up and down the saddle height for fitting
your well riding, and then lock the quick release fastener ②.
Attention: No need to loose Quick-release fastener ① for adjusting the saddle
height.
The safety line on the seat post must be inserted inside to the middle seat post.
Attention: Minimum depth of the inserted for the seat post should be that, you can
not see the safety line in the middle seat post.
When you adjust the seat post height for your well riding, please pull out the
middle seat post for adjusting its height first, if the height is still not enough,
