5
E-bike Shrinker User’s Guide
please pull out the seat post for its right height, after that lock the quick-release
fastener ①.
5
Adjustment of Main Parts
5.1
Handlebar Adjustment
See in reference illustration A:
·
Insertion depth of the stem can not be less than the
Minimum depth, to make sure that the safety line on the
stem are invisible.
·
The fastening torque of the handle bar screw and clamp screw bolt can not be less
than 18 N.m.
Attention
：
During your adjusting the handlebar stem up or down, please do not let
the connect plug of electrical parts loosed.
5.2
LE-throttle Grip Working Process
(Non for Euro Market)
(As parts
○
20
shown) the E-throttle grip is installed on the right handlebar; during you
turning over in anti-clockwise direction slowly ,the E-power switch will be turned on,
the working E-current will be going larger, and the E-throttle opens larger as well, the
maximum rotate top position can be at 90 degree, as the E-throttle to opened to it’s
top.
As you release the E-throttle grip, it can be returned back to its beginning position
automatically, accordingly the E-power switch will be cut off.
