Alante Jr. GP-200 Manual
Revised 060208
ASSEMBLY Cont.
The seat assembly weighs 23 pounds. Please ask for help if you do
not feel capable of safely lifting that much weight. Removal of arms will
significantly reduce the weight of the seat.
Be sure the seat is correctly installed and locked before operating
your power chair.
Arm and Seat Belt Installation
1.
Slip the loops ends of the seat belt over the lower arm.
2.
Insert the arms into the arm receiver tube at the bottom rear of the seat so that
the height adjustment knobs face toward the front of the unit.
Figure 7
3.
Adjust the width of the arms and secure by tightening the arm width adjustment
knobs.
Figure 8