Alante Jr. GP-200 Manual
Revised 060208
COMFORT SETTINGS Cont.
2.
Adjust the arms to the desired width making sure not to exceed 28 inches total
outside width at the armrests.
3.
Tighten the arm width adjusting knobs.
Arm Rest Angle
1.
Lift the arm
2.
Loosen the armrest angle adjustment screws with a 13mm wrench.
Figure 18
3.
Turn the armrest angle adjustment screws outward to adjust the angle upward,
screw it inward to adjust the angle downward to the desired angle.
4.
Tighten the armrest angle adjustment screw.
Footrest Angle
1.
Lift the footrest plate.
Figure 19
2.
Loosen the footrest angle adjustment screw with a 12 mm wrench.
Figure 20
3.
Turn the footrest adjustment screw inward to lower the footrest angle, turn it
outward to raise the footrest angle.
4.
Tighten the footrest angle adjustment screw.
