Alante Jr. GP-200 Manual
Revised 060208
BATTERY CHARGING
NOTE: You must use only the charger that is supplied with your
Alante Jr.™.
The use of any other charger on this power chair will void the
warranty. Using unauthorized chargers may also result in severe damage to the
batteries and/ or damage to the chair. Using the wrong charger may also be a fire
hazard.
OPERATIONAL RANGE
Depending on the use, the terrain, and the driving conditions, the batteries of your
Alante Jr.
™ will provide fifteen to twenty miles of operation.
♦
We recommend that you charge the batteries when necessary. Battery charge should
be treated similarly to fuel in a car. You would not go on a long trip with fuel low or fill
up when almost full.
CHARGING THE BATTERIES
Your
Alante Jr.’s
charging system is designed for your safety and for your convenience.
Follow the steps below to recharge the batteries.
1. Position your
Alante Jr.
™
close to a standard wall electrical outlet.
2. Turn off the power on the joystick.
3. Insert the matching charger plug into the joystick’s charging socket that is located at
the front of the joystick. See Figure 26.
4. Insert the plug at the other end of the charger power cord into a standard electrical
wall outlet.
5. Disconnect the charger power cord from the wall outlet and from the joystick
charging socket when the batteries are fully charged.
NOTE: The batteries will be fully charged in four to eight hours. A full charge is
indicated when the green light on the battery charger side panel turns on and all
10 joystick LEDs are lit when joystick is turned on.
Figure 26
