Alante Jr. GP-200 Manual
Revised 060208
BATTERY CHARGING Cont.
Alternatively, you may charge the battery pack directly.
1.
Remove the battery pack from the power chair.
2.
Locate the charger port at the rear of the battery pack and swing the cover out
of the way.
3.
Plug the charger into the battery pack socket.
Figure 27
4.
Insert the plug at the other end of the charger power cord into a standard
electrical wall outlet.
5.
Disconnect the charger power cord from the wall outlet and from the battery
pack charging socket when the batteries are fully charged.
NOTE: The batteries will be fully charged in four to eight hours. A full charge is
indicated when the green light on the battery charger side panel turns on
and all 10 joystick LEDs are lit when joystick is turned on.