25
VII. DISASSEMBLY
FIGURE 20. COMPLETELY DISASSEMBLED
DISCONNECT THE FRONT AND RE
FRAME SE
ONS
1. Pull up on the T handle next to the seat post See figure 19. Pulling up on the T handle will
separate the front and rear section.
2. Your Companion scooter is now fully disassembled. See figure 20.
2. Squeeze the locking ear on the connector and disconnect the batteries from the frame.
See Figure 18.
3. Remove the batteries one at a time.
4. Lower the tiller, which will automatically lock into place once lowered.
The key must be removed from the key switch to fully lower the tiller. The tiller
will only lock when it is in the center position.
FIGURE 18. BATTERY CONNECTORS
FIGURE 19. PULL T-HANDLE