Alanté Sport_GP205CC/SS_Owner’s Manual Rev C_102714
IV. ASSEMBLY
Before operating or assembling your
Alanté Sport
, be sure to connect the power cable from
the batteries to the VR2 power module. Your
Alanté
Sport
will not power up or operate
without completing this step.
1. Remove the battery cover and body shroud by lifting them straight up and off the power
chair. See figure 2.
Figure 2 Figure 3
2. Plug the power cable into the VR2 power module. See figure 3.
Figure 4
Figure 5
3. Replace the shrouds, making sure not to pinch the joystick control cable. See figure 4.
4. Connect the joystick control to the VR2 power module. See figure 5.
Be sure the joystick cable and controller cables are securely attached
to the unit and that the cables are not able to trail on the ground or become
entangled on any surrounding objects while the unit is in use.
The
Alanté
Sport
batteries weigh 22 pounds each. The standard
(18 x 18) seat assembly weighs 46 pounds. Removal of arms will reduce the weight of
the seat. Please ask for help if you do not feel capable of safely lifting that much
weight.
11
