Alanté Sport_GP205CC/SS_Owner’s Manual Rev C_102714
IV. ASSEMBLY - cont.
Seat Installation
1. Fold the seat back down
.
2. Grasp the seat firmly on each side, lift the seat and align the seat pin with the hole in the
seat post receiver. See figure 6.
3. Insert the seat into the seat post.
4. Push down on the seat to lock into place. Move the seat from side to side to make sure it
is locked into place.
To rotate your seat, push down on the seat rotation lever and rotate
the seat to the desired position. Release the handle to lock the seat in position.
Be sure the seat is correctly installed and locked before operating
your power chair.
Headrest Installation
1. Align the headrest with the holes in the seat back.
2. Push in on the headrest clamp and push down on the headrest to insert it into the seat
back. See figure 7.
12
Figure 7
Figure 6