Alanté Sport_GP205CC/SS_Owner’s Manual Rev C_102714
IV. ASSEMBLY
Joystick Installation
1. Loosen the joystick bracket adjustment screw located under the armrest. See figure 10.
2. Insert the joystick mounting tube into the joystick bracket under the armrest.
3. Adjust the position of the joystick to a comfortable spot.
4. Tighten the joystick adjustment screw to secure the joystick.
Note:
The joystick may be installed on the left or right arm according to your preference.
Accessory Receiver Installation
1. Locate the two holes in the center of the arm receiver tube at the bottom rear of the seat
frame.
2. Insert the two bolts, place the two lock nuts onto the bolts on the backside of the arm
receiver and tighten to secure as shown in figure 11.
14
Battery
Charge
LED Array
On/Off
Button
Horn
Button
Speed Setting
LED Array
Speed
Setting
SLOWER
Speed
Setting
FASTER
Top
View
of
Joystick
Figure 10
Figure 11
Lock Nuts (2)
(13mm)
Bolts (2)
(5mm Allen)