Alanté Sport_GP205CC/SS_Owner’s Manual Rev C_102714
V. DISASSEMBLY and BATTERY REPLACEMENT
1. Use the screws, washers, and nuts provided to connect the positive (red booted)
connector of each cable to the positive (+) terminal of each battery.
2. Use the screws, washers, and nuts provided to connect the negative (black booted)
connector of each cable to the negative (-) terminal of each battery.
See figures 13 and 14.
3. Place the batteries in the battery tray. Be certain to position the terminals on each
battery as shown in Figure 12 on page 15. Secure the batteries in place using the buckle
strap.
4. Connect the connectors of each battery cable to the corresponding connector on the
main wire harness. See figure 12 on page 15.
5. Cover the battery terminals with the protective caps provided. See figure 14.
6. Install the battery cover.
7. To disassemble, please reverse the above process.
16
Figure 14
Figure 13
NUT
LOCK
WASHER
FLAT
WASHER
BATTERY
TERMINAL
RING TERMINAL
FLAT WASHER
BOLT
BATTERY