Alanté Sport_GP205CC/SS_Owner’s Manual Rev C_102714
VI. COMFORT SETTINGS
You may be spending a great deal of time on your
Alanté Sport
. To provide you with the
maximum seating comfort, Golden Technologies, Inc. has designed this power chair to
incorporate the following adjustments for operator comfort.
COMFORT SETTINGS
1. Seat Height 5. Arm Width 9. Joystick Bracket Length
2. Headrest Height 6. Armrest Angle 10. Joystick Position
3. Backrest Angle 7. Footrest Angle
4. Arm Height
8. Footrest Height
Make certain that the power to your
Alanté Sport
is turned off before
making any adjustments, to eliminate the risk of the joystick being accidentally bumped
and activating the power chair.
Seat Height Adjustment
The seat is a center post design that is easily adjusted for height.
To adjust the height to a comfortable level:
1. Remove the seat. See figure 15.
2. Place a 17mm wrench on the lock nut, and insert an 8mm Allen wrench into the bolt.
3. Loosen and remove the bolt, two washers and lock nut, noting their placement.
4. Set the seat post to one of the three adjustment positions.
5. Reinsert the bolt, two washers and lock nut in the same order you remove them and
tighten securely.
When reinstalling the seat post, the seat stop must be positioned on
the left hand side of the power chair to ensure proper seat rotation
.
17
Lock Nut
Washers
Bolt
Figure 15
Seat
Stop
