Alanté Sport_GP205CC/SS_Owner’s Manual Rev C_102714
VIII. BATTERY CHARGING
CHARGING THE BATTERIES
Your
Alanté Sport’s
charging system is designed for your safety and for your convenience.
Follow the steps below to recharge the batteries.
1. Position your
Alanté Sport
close to a standard wall electrical outlet.
2. Turn off the power on the joystick.
3. Insert the matching charger plug into the joystick’s charging socket that is located at
the front of the joystick. See Figures 29 and 30.
4. Insert the plug at the other end of the charger power cord into a standard electrical
wall outlet. (Power to the charger indicated by a red LED).
NOTE: MAKE SURE THE STANDARD ELECTRICAL OUTLET YOU ARE USING IS
NOT CONTROLLED BY A LIGHT SWITCH CAUSING THE CHARGER TO SHUT OFF
WHEN IT IS ACTIVATED.
5. Disconnect the charger power cord from the wall outlet and from the joystick
charging socket when the batteries are fully charged.
NOTE:
The batteries should be fully charged in eight hours. A full charge is indicated,
when the charge LED turns green and all 10 joystick LEDs are lit when the joystick is
turned on.
32
Figure 29
Figure 30