12
MOUNT HYDRAULIC CYLINDER
Note: Ensure Hydraulic Cylinder is oriented so that the lower
mounting hole is facing downward.
1.
Align the lower Hydraulic Cylinder mounting hole with the
corresponding holes on the Lower Cylinder Mount as shown
in Figure 11.
2.
Insert one (1) 3/4” Cylinder Pin into the cylinder hinge plate
through the Hydraulic Cylinder lower mounting hole as
shown in Figure 11.
3.
From the inside of the hinge plate, insert one (1) 3/8” Hex
Bolt through the hinge plate and the lower hole on the
Cylinder Pin.
4.
Attach one (1) 3/8” Lock Washer and one (1) 3/8” Hex Nut to
the protruding end of the Hex Bolt and fasten with
appropriate wrench until secure as shown in Figure 11.
PARTS REQUIRED TO MOUNT HYDRAULIC
CYLINDER
Hydraulic Cylinder (1)
3/8” Lock Washer (1)
3/8” Hex Nut (1)
3/8” x 4
-
1/2” Hex Bolt (
1)
3/4” Cylinder Pin (1)
Figure 11
Summary of Contents for Tornado 1-CYLINDER
Page 3: ...3 ...
