GoldenEar Technology Triton two Owner'S Manual Download

Page: 14 / 16

GoldenEar Technology

►

Triton Two Manual

Triton Two Owner’s Manual

Service

Service and warranty work on your GoldenEar loudspeakers will normally be performed by your local

GoldenEar Technology dealer. If, however, you wish to return the speaker to us, please contact us first,
describing the problem and requesting authorization as well as the location of the nearest factory service
center.

Please note that the address given in this booklet is the address of our office P.O. Box only. under no

circumstances should loudspeakers be shipped to our offices or returned without contacting us first and
obtaining return authorization.

GoldenEar Technology Offices

P.O. Box 141

Stevenson, Maryland 21153

Phone: 410-998-9134

Specifications

triton two

Speaker Dimensions:

" W x 15" D x 48" H (height is with base installed, no spikes)

Base:

" W x 18" D

Weight:

60 lbs.

Frequency Response:

16 Hz – 35 kHz

Efficiency:

91 dB

nominal Impedance:

Compatible with 8 ohms

Driver Complement:

Two 5" x 9" long-throw quadratic subwoofers coupled to

Two 7" x 10" quadratic planar infrasonic radiators

Two 4

" high-definition cast-basket mid/bass drivers

One HFVR

™

High-Velocity Folded Ribbon tweeter

Rec. Amplification:

20 – 500 Watt/channel

Built-In Subwoofer
Power Amplifier:

1200 Watt ForceField subwoofer digital/DSP amplifier

Fuse Size:

5-amp 250-volt slow blow fuse (110-volt version)

3.15-amp 250-volt slow-blow fuse (240-volt version)

Specifications are subject to change without notice.

Summary of Contents for Triton two

















Search results

Summary of Contents for Triton two

Reviews:

Related manuals for Triton two

Brands by name

Popular brands

GoldenEar Technology Triton two, Owner'S Manual

Search results

Summary of Contents for Triton two

Reviews:

Related manuals for Triton two

Brands by name

Popular brands