Page 14
Cleaning and maintenance should be carried out with the appliance cold, especially when cleaning the enam-
el parts. Avoid using alkaline or acid substances (lemon juice, vinegar etc..) on the surface.
CERAMIC GLASS PANEL
The ceramic glass hob of the hotplate must be cleaned regularly ( e.g. weekly) to ensure long life expectancy of
the hot plate.
Ensure the hot plate has cooked. Wash down with warm soapy water and rinse with clean water.
Dry with a warm cloth.
NOTE: Ensure that wiping is done along the grain of the ceramic glass top to prevent any unsightly crisscross
scratching patterns from appearing.
TRIVETS (UTENSIL SUPPORTS
Enameled parts must only be washed with a sponge and soapy water or
with non
-
abrasive products. Rinse with clean water.
Dry with a clean dry cloth.
BURNERS
Remove trivets from hob. Ensure that burners are cool. Remove the
burners enameled cape and aluminum burner crown (F)
Wash down with warm soapy water and rinse with clean water.
Dry with a clean dry cloth.
Use a cotton bud, toothbrush or some other similar item to clean out any
incrustations or dirt from the four holes marked (H)
Replace burners and ensure they are correctly repositioned over the
igniter (S) and thermocouple (T). The igniter (S) must be kept clean
for trouble free sparking. Test the burner ignition and burner flame
for correct operation.
The DCC (wok) burner ( bottom diagram) does not fit over the ignit-
er to thermocouple for positioning but must be placed on its sup-
ports.
If the burner is in the correct position it will not rotate.
Summary of Contents for SAB Series
Page 1: ...GOLDLINE GAS COOKTOP SAB SERIES USER MANUAL ...
Page 6: ...Page 6 ...