GOLDMUND MIMESIS 22S - Analog Preamplifier -11
3
CONTROLS & UTILIZATION (Ctd.)
3.4
BALANCE ADJUSTMENT
The left-hand rotary switch (
6
) is used to adjust BALANCE.
If the volume value is set to zero, balance modification is not visible: Left and right volume
will be displayed at zero.
The left and right output volumes can be re-equalized after balance adjustment by using
the “Center” selector on the Remote Control.
3.5
MUTE
Press the MUTE/PWR button (
3
) to mute output.
This switch turns off the output of the preamplifier, without disconnecting the power supply.
It can be used to temporarily turn the volume down without touching the volume control.
Volume and balance adjustment are still possible when the preamplifier is muted.
3.6
ABSOLUTE PHASE
The PHASE/EDIT switch (
4
) reverses the polarity of the signal (180
o
out of phase)
simultaneously on both channels. A red Led is illuminated to indicate the activation of the
phase modification.
3.7
RECORD
To select the RECORD INPUT function press the REC/MENU button (
5
). The display will
read ‘SELECT REC INPUT’. Then press the input button (
2
) to select RECORD INPUT.
