GOLDMUND MIMESIS 22S - Analog Preamplifier -14
3
CONTROLS & UTILIZATION (Ctd.)
3.9
EDIT MENU (Ctd.)
1. Global gain
Global input gain limits can be modified to b12 to –12dB.
Use the right rotary switch VOLUME (
7
) to change preamplifier global gain. The new
limit set will be displayed. The input gain value can then be modified if outside the new
limits.
Global Gain should always be set before adjusting Input Gain. If this rule is not followed
the global adjustment may conflict with the individual input gain adjustment. The Input
Gain should therefore be re-checked and re-adjusted.
2. Input gain
Select input using the ‘IN1’ to ‘IN7’ button (
2
)
Use the right rotary switch VOLUME (
7
) to change input gain
Input gain limits are fixed by the global gain.
The maximum gain difference between inputs is 24dB.
3. Input name
The default Input Channels can be reassigned using up to 14 characters.
Select input with ‘IN1’ to ‘IN7’ button (
2
)
Use the left rotary switch BALANCE (
6
) to select the character to be changed.
Use the left rotary switch VOLUME (
7
) to change the character.
