1.
Make sure that the power cord is unplugged.
With the help of a second person, carefully tip
the treadmill onto its left side. Partially fold the
Frame (58) so the treadmill is more stable.
Do
not fully fold the Frame until the treadmill is
completely assembled.
Identify the Right Upright (107) and the Left
Upright (84) (the Left Upright has two small
holes in the indicated location).
Hold the Right Upright (107) near the Base (108)
at the angle shown. Feed the end of the Wire
Harness (77) into the hole in the Base, into the
bottom of the Right Upright, and out of the top.
1
6
ASSEMBLY
Assembly requires two persons.
Set the treadmill in a cleared area and remove all packing materials. Do not
dispose of the packing materials until assembly is completed. Note: The underside of the treadmill walking belt is
coated with high-performance lubricant. During shipping, lubricant may be transferred to the top of the walking
belt or the shipping carton. This is a normal condition and does not affect treadmill performance. If there is lubri-
cant on top of the walking belt, simply wipe off the lubricant with a soft cloth and a mild, non-abrasive cleaner.
Assembly requires the included hex key and your own phillips screwdriver .
For help identifying the assembly hardware, see the drawings below.
The number in parentheses below each
drawing is the key number of the part, from the PART LIST on page 30. The number following the parentheses is
the quantity needed for assembly.
Note: Some small parts may have been preassembled. If a part is not in
the parts bag, check to see if it has been preassembled. To avoid damaging plastic parts, do not use
power tools for assembly.
84
58
107
77
77
108
Wheel Nut (13)–2
1
Wheel Nut (32)–2
(
)
Handrail Bolt (64)–4
3 1/2” Bolt (45)–4
Extension Leg Bolt (96)–4
3
Star Washer
(84)–2
1" Tek Screw (83)–4
Star Washer (8)–4
Extension Leg Nut (67)–4
Screw (3)–2
Extension Leg Bolt (65)–4
Flat Washer
(102)–4
4 1/2" Bolt (103)–4
3/8" Star
Washer (23)–8
2 3/4" Upright Bolt (105)–2
Console Bolt (64)–4
1" Upright Bolt
(106)–2
Extension Leg Bolt (96)–4
Small Holes
