10
39
47
Grease
38
49
54
77
77
49
54
66
9. Identify the Right Link Arm (39) and the Right
Pedal Arm (38), which are marked with “R”
stickers, and orient them as shown.
Apply a generous amount of grease to a Link
Axle (47). Also, apply a small amount of grease
to a 16mm Wave Washer (66).
Insert the Link Axle (47) into the Right Link Arm
(39) and then slide the 16mm Wave Washer
(66) onto the right side of the Link Axle.
With the help of another person, slide the Right
Pedal Arm (38) onto the right side of the Link
Axle (47).
Attach the Right Link Arm (39) and the Right
Pedal Arm (38) with two M8 x 20mm Button
Screws (77), two Link Axle Covers (49), and
two M8 x 25mm Washers (54).
Repeat this step for the Left Link Arm (not
shown) and the Left Pedal Arm (not shown).
9
37
Grease
38
58
46
46
52
52
39
71
31
10. Apply a generous amount of grease to the axle
on the Right Upper Body Leg (37) and to the
right Crank Arm (31).
Apply a small amount of grease to two 19mm
Wave Washers (71).
Slide one 19mm Wave Washer (71) onto the
Right Upper Body Leg (37); slide the other
Wave Washer onto the right Crank Arm (31).
Identify the Right Pedal Arm (38) and the Right
Link Arm (39) assembly, which is marked with
an “R” sticker. Orient the assembly as shown.
At the same time and with the help of another
person, slide the Right Pedal Arm (38) onto the
Right Upper Body Leg (37) and slide the Right
Link Arm (39) onto the right Crank Arm (31).
Attach the Right Pedal Arm (38) and the Right
Link Arm (39) with two M10 x 20mm Button
Screws (58), two Axle Covers (46), and two
M10 x 25mm Washers (52).
Repeat this step for the other side of the
elliptical exerciser.
10
