Gold's Gym XRS 20, User Manual

7

ASSEMBLY

2.  Orient the Front Stabilizer (2) so that the square 

holes are toward the floor. Attach the Front 

Stabilizer to the Front Leg (4) with two M10 x 

90mm Carriage Bolts (40) and two M10 Locknuts 

(12). 

Do not tighten the Locknuts yet.

2

12

12

4

2

40

Square 

Holes

•  To hire an authorized service technician to 

assemble the weight system, call 1-800-445-2480.

•  Assembly requires two persons.

•  Because of its weight and size, assemble the 

weight bench in the location where it will be used. 

Make sure that there is enough clearance to walk 

around the weight bench. 

•  Place all parts in a cleared area and remove the 

packing materials. Do not dispose of the packing 

materials until assembly is fi nished. 

•  For help identifying small parts, see page 6.

•  In addition to the included tool(s), assembly 

requires the following tool(s):

two adjustable wrenches 

one rubber mallet 

one standard screwdriver 

one Phillips screwdriver 

Assembly may be easier if you have your own set 

of wrenches. To avoid damaging parts, do not use 

power tools.

1. 

 Go to www.workoutwarehouse.com/

registration on your computer and register 

your product.

  •   activates your warranty
  •   saves you time if you ever need to contact 

Customer Care

  •   allows us to notify you of upgrades and offers

   Note: If you do not have Internet access, call 

Customer Care (see the front cover of this 

manual) and register your product.

1