GRINDER STRAIGHT HANDLE GH-10-28-O
OPERATION MANUAL
12
WARNING
In case of leakage, there is a risk of slipping on the oil film.
-
Remove spilled hydraulic oil with the prescribed absorbent material.
-
Put on S3 safety shoes.
WARNING
The rail being worked on and the grinding disc are very hot. There is a danger of serious burns if they
[JB5]
are touched.
-
Allow the rail to cool down (400° C / 752° F) after welding.
-
Wear work gloves.
WARNING
Improper maintenance or maintenance not carried out on time may result in damage to the machine or
injury to persons.
-
Maintenance intervals are to be determined by the operator within the scope of their risk assessment.
-
Observe the maintenance intervals and maintenance instructions of the manufacturer and existing
directives.
-
Components may only be replaced with identical spare parts. It is imperative that the specifications of
the component manufacturer be followed when mounting the component.
WARNING
Spilled hydraulic oil can lead to an increased risk of fire and environmental pollution.
-
Remove spilled hydraulic oil with the prescribed absorbent material.
WARNING
In case of poor weather conditions (rain, snow) there is a risk of injury due to poor visibility or slippery
standing surfaces.
-
Stop work if standing surfaces are slippery.
-
Stop work if visibility is poor.
WARNING
Operating errors using the device, e.g. by instruction errors, may lead to personal injury or damage to the
device.
-
The instruction for use must be accessible to operators and maintenance personnel at all times!
-
A copy of the technical documentation including the instruction for use must be kept in a suitable and
accessible place.
