RAIL SAW SR 310 H
OPERATION MANUAL
10
Symbol
Meaning
DANGER
DANGER indicates a hazard with a high degree of risk, which when it is not avoided results in death or
serious injury.
WARNING
WARNING indicates a hazard with a medium degree of risk, which when it is not avoided may result in
death or serious injury.
CAUTION
CAUTION indicates a hazard with a low degree of risk, which when it is not avoided may result in minor
or moderate injury.
NOTICE
NOTE, non-compliance may result in environmental or material damage
Attention risk of injury!
General note
[JB2]
for helpful tips and additions.
Read the safety information before using the machine. Non-compliance may result in injuries and
damage to property.
Table 1: Signal words and symbols
3.2
Important safety information
Read this chapter and observe the safety information before using.
The safety regulations are to be observed by all persons who work on the device. The regulations and instructions for accident
prevention valid at the place of operation are to be observed. Instruction of the operating and maintenance personnel in system
safety is to be documented.
Please pay particular attention to this chapter to avoid accidents!
PortaCo Inc. is not liable for injury to persons or property which result from misuse of the machine.
DANGER
During operation, it is possible to reach into the guiding mechanism of the saw.
-
Wear the prescribed personal safety equipment!
-
Hold and operate the machine using the handles intended for this.
-
Never use the machine without the protective cover and spark barrier.
-
Before beginning maintenance work ensure that the cutting disc is not moving and cannot be
accidentally switched on.
