RAIL SAW SR 310 H
OPERATION MANUAL
11
DANGER
The bursting of hydraulic components and uncontrolled whipping of the hydraulic hoses is possible.
-
Only use the machine within the prescribed limits.
-
Before disconnecting the hydraulic couplings, make sure that the pressure is relieved.
-
The machine must be maintained at regular intervals, the intervals are specified by the operator's risk
assessment.
DANGER
Contact with live parts results in the worker sustaining a lethal electric shock.
-
In the case of railway tracks with live rails, the busbar must be shorted or switched off by the control
room of the transport company.
-
Check that no voltage is present in the rail system continuously!
DANGER
The operator or persons standing close by can be injured by sparks. Highly flammable objects may ignite.
-
Wear flame-retardant work clothing during work.
-
Remove highly flammable objects from the surrounding area.
DANGER
The operator inhales aerosol of hydraulic oil.
-
Only use the device within the prescribed limits.
-
The device must be maintained at regular intervals, the intervals are specified by the operator's risk
assessment.
-
In the event of leaks switch the device to a safe state.
DANGER
If an employee is hit by a train or car, severe or fatal injuries may result.
-
Pay attention to your own safety!
-
Wear work clothing with reflectors and a safety vest!
-
The foreman must ensure that the line being worked on has been closed.
-
Place a track marshall with a horn on the opposite track.
DANGER
Employees may be severely or fatally injured by lightening during a thunderstorm.
-
Stop work during thunderstorms!
