2
The Goldtouch Go!
2
Travel Keyboard is equipped with Bluetooth technology. Bluetooth
is a short-range wireless technology that lets you connect multiple computers, input
devices, mobile phones, and handheld devices to each other without cables. To use the
Goldtouch Bluetooth Keyboard, please check to make sure that your device is Bluetooth
capable, and that Bluetooth is turned on. You may check your manufacturer part number
or invoice to see if your device is equipped with a Bluetooth Receiver.
If you aren’t sure your device is equipped with Bluetooth technology, please refer to the
Bluetooth Validation guide in the Troubleshooting section on page 8.
Begin by selecting your operating system, by adjusting
the switch located on the back of the keyboard to PC or
Mac mode. (Please note, keyboards are in PC mode by
default).
Next follow the directions for your specific device:
Getting Started - Bluetooth Validation
How to pair your Bluetooth Go! with your device
You may need only simple instructions to correct a problem with your purchase from
Goldtouch, Key Ovation. You can email our Support team at support@goldtouch.com.
Hours of operation are from 9am-5pm CST, Monday through Friday (times subject to
change). 24 hour service is available through our website at www.goldtouch.com.
Help and Service Information
Bluetooth Pairing with PC
1. Turn on the power using the power switch on the back
of the keyboard.
2. Press the
Connect
button on the back of the keyboard, the
blue pairing light on the keyboard status bar will blink when
the keyboard is in pairing mode.
3. Scan for Bluetooth devices on your PC or tablet.
4. Once your PC has recognized the device, you will be presented
with a pairing code. Enter the pairing code on the Bluetooth
keyboard and press Enter.
5. Please allow time for your system to automatically install the
proper drivers for your new keyboard.
Microsoft
Bluetooth Pairing with MAC
1. Turn on the power using the power switch on the back
of the keyboard.
2. Press the Connect button on the back of the keyboard,
the blue pairing light on the keyboard status bar will
blink when the keyboard is in pairing mode..
3. Scan for Bluetooth devices on your Mac, iPad or iPhone.
4. Once your Mac has recognized the device, you will be
presented with a Passkey. Enter the Passkey on the
Bluetooth keyboard and press Enter.
5. Please allow time for your system to automatically install
the proper drivers for your new keyboard.
Apple
Please be aware that there are two magnetized rubber bumpers located on the right and
left sides of your keyboard. These magnetic bumpers help ensure that the two segments
of the keyboard stay folded during transport.
We recommend that you avoid directly exposing your credit or debit cards to these mag-
netic strips. Credit cards may become unreadable when exposed to magnets for long pe-
riods of time. Close proximity will not have an effect on the credit card. The card would
need to be placed directly on the strip for some period to cause an issue.
Warning
Under normal operating conditions, your Bluetooth Go!
2
will maintain connectivity to
your mobile device or PC up to a distance of ten meters, or 33 feet.
Note: The operating distance may be affected by the type of Bluetooth adapter in use.
Operating Distance
Like all electronic equipment you need to avoid getting it wet, dropping it, or using un-
due force to depress the keys or operate the latch handle.
Do not subject the keyboard to extremes in temperature. Your keyboard will operate best
in temperatures of - 5° C to 50° C (23°F to 122°F).
Keep the surface of your keyboard clean by wiping with a soft cloth that is dampened
with a mild cleaning solutions; preferably water and mild soap.
Important: Do not attempt to adjust the keyboard without releasing the latch handle
and DO NOT PLACE ANY LUBRICATION or CLEANING FLUID IN THE BALL JOINT. THIS WILL
VOID YOUR WARRANTY.
Maintaining Your Keyboard
11
Connectivity
Please note, the Goldtouch GTP-0044W is wireless only. The USB port on the keyboard is
only for charging the battery and will not provide connectivity to your computer or other
device.
