GP-L200N User Manual
19
Field
Description
(SSID)
legal characters include letters, numerals, underline, and
the combination of these characters.
Multiple SSID1~6
Wireless security setting can apply for each SSID
independently.
Broadcast Network
Name (SSID)
Whether to broadcast SSID. After this function is enabled,
the AP broadcasts its SSID.
AP Isolation
Enable or disable isolation among AP clients. After this
function is enabled, the client terminals that connect to the
same AP cannot communicate with each other.
MBSSID AP Isolation Enable or disable isolation among different SSIDs. After
this function is enabled, the client terminals with different
SSIDs cannot communicate with each other.
BSSID
The MAC address of the wireless interface.
Frequency (Channel) You can select a proper channel from the drop-down list.
The default is
Channel 6
.
Wireless Distribution System (WDS)
WDS modes include
Lazy Mode
,
Bridge Mode
, and
Repeater Mode
. You can
also disable WDS.
(1)
Lazy Mode
In the lazy mode, an AP automatically connects to the WDS devices that use the
same SSID, channel, encryption mode, and the physical mode. You need not
manually enter other MAC addresses of peer APs.
The following table describes parameters in the
Lazy Mode
:
Field
Description
