GP-L200N User Manual
20
Field
Description
WDS Mode
Select
Lazy Mode
from the drop-down list.
Phy Mode
You can select
CCK
,
OFDM
,
HTMIX
, or
GREENFIELD
.
Encryp Type
You can select
NONE
,
WEP
,
TKIP
, or
AES
. If you select
WEP
,
TKIP
, or
AES
, you need to set the encryption key.
Encryp Key
Enter the encryption key.
Step 1
In the
Basic Wireless Settings
page, set the
WDS Mode
to
Lazy Mode
,
set the same
Phy Mode
and
Encryp Type
as the peer AP, and enter the
MAC address of the peer AP. Then, click
Apply
to save the settings.
Step 2
Choose
Wireless Settings
>
Security
. In the
Wireless
Security/Encryption Settings
page that is displayed, set the
Security
Mode
of the GP-L200N to accord with the peer AP.
(2)
Bridge Mode
In the bridge mode, you can use the GP-L200N to connect to your router, for
extending wireless coverage. Meanwhile, it can also decrease the working load of
the AP that accesses the Internet. In that case, the wireless card does not directly
communicate with the wireless device that accesses the Internet, but it directly
communicates with the GP-L200N.
Step 1
In the
Basic Wireless Settings
page, select the WDS mode to
Bridge
Mode
.
