GP-L200N User Manual
1
1 Overview
Thank you for choosing the GP-L200N.
The GP-L200N (also called PLC Wireless Extender) is fully compatible with
HomePlugAV and can co-exist with HomePlug 1.0. Meanwhile, it is also
compatible with 802.11b/g/n standards. The GP-L200N supports CCK and OFDM
and its PowerLine phy rate is up to 200Mbps, wireless phy rate is up to 150 Mbps
under 11n mode.
The GP-L200N provides 128-bit AES encryption in PowerLine communication,
64-bit and 128-bit WEP encryption, WPA encryption in wireless communication,
associating with IEEE 802.1X authentication, which ensures the security of
wireless communication.
Package list
Please check whether your package list includes the following items:
GP-L200N
x
1
CD-ROM
x
1
RJ45 x 1
Quid installation Guide x 1
Security Notes
This device is intended for connection to the AC power line. For installation
instructions, please refer to the installation section of this guide. The following
precautions should be taken when using this product.
Read all instructions before installing and operating this product.
Follow all warnings and instructions marked on the product.
Unplug the device from the wall outlet before cleaning. Use a damp cloth for
cleaning. Do not use liquid cleaners or aerosol cleaners.
Do not operate this product near water.
This product should never be placed near or over a radiator or heat register.
Do not use an extension cord between the device and the AC power source.
