GW-WR150N/GW-WR150ND 150Mbps Wireless Router User Manual
85
The parameters in this page are described as follows:
Field
Description
DHCP Server
Enable or disable the DHCP server. When disabling the DHCP
server, you do not need to set the other parameters in this
page.
Start Address of
Address Pool
The starting IP address that the DHCP server automatically
assigns to the hosts in the LAN.
End Address of
Address Pool
The end IP address that the DHCP server automatically assigns
to the hosts in the LAN.
Lease Time
The lease time is the valid time of the IP address that the DHCP
server assigns to the hosts. During the valid period of the IP
address, the DHSP server will not assign this IP address to
other hosts.
Gateway
Enter the IP address of the LAN interface. The default gateway
is 192.168.1.1. It is optional.
Primary DNS
Server
Enter the primary DNS server address (optional). If you are not
sure of the DNS server address, please consult your ISP.
Secondary DNS
Server
Enter the Secondary DNS server address (optional). If you are
not sure of the DNS server address, please consult your ISP.
After finishing setting, click the
Save
button to save the settings.
Note:
If you want to use the DHCP function of the wireless router, you need to set the
Internet Protocol (TCP/IP)
to be
Obtain an IP address automatically
.
6.5.2 Static Address Allocation
The static address allocation function of the wireless router can reserve the static IP
addresses for the computers with the specific MAC addresses. When a computer
whose MAC address is in the allocation table of static address requests the DHCP
server for an IP address, the DHCP server assigns the reserved IP address to the
computer.