1. Select the correct guide for your engine and drill the holes and cut out the center as indicated. Notice that
the engine center line is offset to the left to compensate for the right thrust built into the engine box.
2. Fit the Cowl and measure the distance from the engine bulkhead to the front of the cowl, add approx 2-
3mm for the back plate and this is the length that your engine should be set. Using the correct length stand
offs, mount your engine securely using bolts, washers, and locknuts. The use of thread-lock is also highly
essential for the engine bolts.
3. Mount the ignition module according to the manufacturer’s instructions. The best place to mount it is on
the side of the engine box. Secure the pickup lead and ignition wires with zip ties so that they do not vibrate
or touch any hot part of the engine or exhaust.
Summary of Contents for SBACH342 120E
