Set your time when you unpackage your LD2, and anytime you want
to update your clock, such as when traveling to different timezones.
To set your time, follow steps
1 – 5
below (continues on page 5).
1.
From the Home (time) screen (image
A.
) press the center
button (
II.
) to access the Main Menu.
2.
Use the lower button (
III.
) to navigate to the clock icon, then
press the center button (
II.
) to select the Clock icon (image
B.
).
3.
The Time Options screen (image
C.
) will display. From here you can:
I.
Adjust Daylight Savings Time (DST) using the upper button.
The default setting is ON +1. In areas that observe DST, this is
the setting used from Spring – Autumn. , use OFF -1 from
Autumn – Spring.
Note:
After a 4-second delay, the LD2 will return to the home (time)
screen, and the time will be updated accordingly.
II.
Set Time using the middle button (see item
4.
on next page).
III.
Change time format (12/24) using the lower button. The default setting is 12-Hour
Clock.
Note:
After a 4-second delay, the LD2 will return to the home (time) screen, and the clock
will be updated accordingly.
Note:
If no selection is made within15 seconds, the LD2 will return to the Home (Time) screen).
4
2. SETTING TIME
II.
II.
III.
II.
III.
I.
A.
B.
C.
