GOLFBOARD OWNER’S MANUAL
22
3.2.6 Pre-Ride Inspection
Check the following items before stepping onto the GolfBoard:
Remote Accelerator
(if applicable):
Before turning on your GolfBoard or remote, ensure
the accelerator trigger is functioning without obstruction and moves slowly without
binding.
Wheels and tires:
Use an air pressure gauge to check that the tires are properly
inflated. See “Tire Pressure”. Look for signs of excessive wear or damage to the tires.
Loose parts:
Walk around the GolfBoard and look for anything that appears unusual,
such as loose parts, missing hardware, or items obstructing the wheels.
Bag Stand:
Ensure that the bag stand is securely mounted (when in use). Proper
attachment and golf bag mounting
methods are outlined in “Stability Bar / Bag Mount”
section of this owner’s manual.
Fenders:
Check that the fenders are securely mounted to the GolfBoard assembly.
WARNING
If you notice any damage or problems in the pre-ride inspection, please correct them if
they are in the scope of the general maintenance of the board or contact your GolfBoard
authorized repair specialist.