7
CE-ART 7/G+
IP G+
www.golmar.es
6. SETTINGS
Settings.
The settings section provides the following options:
Sip Server
About
Se�ngs
APARTMENT UNIT
Automa�c se�ngs
Network
Local IP
10.0.7.105
Subnet Mask
255.0.0.0
Gateway
10.0.0.1
Server IP
10.0.14.9
*Languages
Language *
1
Dialing code length
5
Block number
1
Apartment address
1
1 Spanish
2 English
3 Portuguese
Once you have accessed the guard unit Web Client, a screen will appear in which you will be able to configure the device.
On the left hand of the screen, you can fill in the
fields related to:
• Language
: You can choose between Spanish,
English and Portuguese.
• Dialing code length
: 5 or 6 depending if a
distinction is to be made as to floor number.
• Block number
: Number of block in which the
guard unit is located. If it is a general guard unit
you must set the block number as 99.
• Apartment address
: Guard units have reserved
addreses from
851
until
859
for each block.
In case of a
general guard unit
, the reserved
addresses go from
901
to
919
.
On the right side of the screen, it appear the fields related to the IP addresses. You can
manually assign the IP address to the guard unit in the same way as describe before.
To end the configuration, press the “Apply” button to save the parameters set. The guard unit will reboot and the initial configuration
will be done.
In this manual we will focus on the “System” settings as the other sections are described in the user manual of the CE-ART 7/G+ guard
unit.
First of all, to access the system settings section it is necessary to enter a password.
Enter password
Password
1
2
3
4
5
6
7
8
9
0
Sistema
The factory default password is
2718.
NOTE: For more information about the guard unit settings, visit the user manual.
Personal
Alarmas
Sistema
