DESCRIPTION OF SAR-GB2 RELAY UNIT
4
Descrip
:
tion
RELAY UNIT TSAR-GB2
POWER IN-USE
BUS
BUS
.
.
SAR-GB2
C N.C
P AP
N.A
12+
CONTACTOS RELE /
RELAY CONTACTS
1,25 A 48 V ~ (Máx. 40w)
2 A 30 V (Máx. 40w)
UNIDAD DE RELÉ
RELAY UNIT
a.
b.
c.
d.
12Vdc and “AP” output connector
.
Relay contact connector
.
Label.
JP
(do not use)
jumper
.
Status LED (power supply)
.
Status LED (active)
.
.
SW1 dip switch
DIN rail latch release.
e.
f.
g.
h.
a
d
c
e
b
g
f
h
The relay unit can be mounted onto a DIN rail
(4 elements) by applying slight pressure.
To remove the relay unit from the rail, use a flat
screwdriver and lever it off, as shown in the
drawing
.
Install the relay unit in a dry and protected location free from the risk of dripping or splashing water.
DIN 46277
Install the SAR-GB2 relay unit and SAR-12/24 together with the FA-GB2A power supply unit.
INSTALLATION
Detail of the installation of the relay unit:
POWER IN-USE
BUS
BUS
.
.
SAR-GB2
C N.C
P AP
N.A
12+
CONTACTOS RELE /
RELAY CONTACTS
1,25 A 48 V ~ (Máx. 40w)
2 A 30 V (Máx. 40w)
UNIDAD DE RELÉ
RELAY UNIT
