Bohrständer
Bedienungsanleitung / Operating instructions / Mode d’emploi
- 20-
02952300993
5001156-03
safety glasses, ear protectors, safety boots, suitable safety clothing). Observe the regulations for the
prevention of accidents!
The personal protection equipment, for work with the drill rig KB500, should consist of the following
parts:
1.3 Selection and qualification of person
Any work on and with the machine must be executed by reliable person only. Statutory minimum age
limits must be observed!
Employ only trained or instructed staff and set out clearly the individual responsibilities of the
personnel for operation, set-up, maintenance and repair. Gölz GmbH can help for instruction.
Make sure that only authorized personnel works on or with the machine.
Define the machine operator’s responsibilities - also with regard to observing traffic regulations - giving
the operator the authority to refuse instructions by third parties that are contrary to safety.
Do not allow persons to be trained or instructed or persons taking part in a general training course to
work on or with the machine without being permanently supervised by an experienced person.
Work on the electrical system and equipment of the product must be carried out only by a skilled
electrician or by properly instructed persons working under the supervision and guidance of a skilled
electrician and in accordance with electrical engineering rules and regulations
1.4 Safety instructions governing specific operational phases
Normal operation of the machine
Before work
Avoid any operational mode that might be prejudicial to safety. Before beginning work, familiarize
yourself with the surroundings and circumstances of the site, such as obstacles in the working and
travelling area, the soil bearing capacity and any barriers separating the construction site from public
roads. Regard all safety specifications!
Take the necessary precautions to ensure that the machine is used only when in a safe and reliable
state. Operate the machine only if all protective and safety-oriented devices, such as safety devices,
emergency shut-off etc. are in place and fully functional.
Check the machine at least once per working shift for obvious damage and defects. Report any
changes (incl. changes in the machine’s working behaviour) to the competent organization/ person
immediately. If necessary, stop the machine immediately and lock it. Have any defects rectified
immediately.
(1)
Helmet with protection of the ears
(2)
Visor or safety glasses
(3)
Dust mask
(4)
Protective gloves
(5)
Safety clothes
(6)
Safety boots
