6
Method B: Software Control through RS-232 port / Ethernet port
System Requirement and Precautions
1. Whenever power off MX-5022, please stay unpowered at least 5 to 10 seconds to allow power
capacitors to discharge.
2. The MX-5022 provides software control program which runs under Microsoft Windows 98, 2000, XP,
7, 8 through the interface of RS-232 serial control.
3. Before you click on the icon of the software, make sure you have secured the connection between
your computer COM port and the MX-5022.
Start the software control program
When clicking on the executable file, the following dialog will pop-up. It has two ways to control the
MX-5022 device (under Microsoft Windows 7, please run as administrator).
RS-232 serial Mode: Use RS-232 to connect the port on device and computer. Select correct COM port
and click the connect button.
TCP/IP Mode: Enter the device IP address and click the connect button.
After the software control setting is accomplished, it will enter directly to control interface.