21
4.3.1
Flat screens with flat back
Fig. 9:
Flat screens with flat back
1. Lean the flat screen vertically on a soft, large surface or a wall and protect it
of scratches and overturning.
2. Install the adapter brackets (B) and (C) by using the fitting screws (M-A) with
or (M-B/M-C) without washer (M-F) on the top and bottom side as shown.
Make sure that the slots are on the flat screens top side.
4.3.2 Flat screens with arched back
Fig. 10: Flat screens with arched back