GKP-2302 User Manual
170
Output function
Continuous
DC offset
×
0 mV
Measurement display mode
Normal
Measurement unit selection
rms
Power unit energization setting
×
All enabled (energization)
Remote sensing
Off
AGC
Off
Autocal
OFF
CO
2
internal loss integration value
×
0.000000 tCO
2
CO
2
output power integration value
×
0.000000 tCO
2
Emission CO
2
coefficient
×
0.000555 tCO
2
/kWh
LCD display
×
White tone
Beep
On
Key lock
Off
Output relay control
On
Output setting at power-on
Off
Trigger output setting
Negative, 10 ms
Time unit
s
Monitor output target
Current (L1 phase)
External interface
×
USB
External control input
Disabled
Clipped sine wave
Clip ratio specified
Clip ratio: 100%
Crest factor: 1.41
Arbitrary Waveform Memory
×
ARB1 to 8: Triangle wave
ARB9 to 16: Square wave
Table 4-14 Setting Items to be Reset (Continued)
Setting Item
Reset
Factory default setting
Sequence parameters
×
Output range: 100 V
AC/DC mode: AC-INT
Step Time: 0.1000 second
Intra-Step behavior: Constant
Waveform: SIN Frequency: 50 Hz
DC voltage: 0 V AC phase voltage: 0 V
Start phase: Disabled, 0 deg
Stop phase: Disabled, 0 deg
Step termination: Continue
Jump count: 1
Jump-to step specification: OFF
Step sync output: LL
Branch step specification: OFF
Trigger output: Off
Simulation parameters
×
Output range: 100 V
Step Time: 0.1 second
Frequency: 50 Hz AC voltage: 0 V
Start phase: Disabled, 0 deg
Stop phase: Disabled, 0 deg
Step sync output: LL
Trigger output: Off
Repeat count: Disabled 1
Summary of Contents for GKP-2302
