GKP-2302 User Manual
212
9.5
AC Output
[V]=Vrms, [A]=Arms, and the power supply input voltage is 200 V, unless otherwise noted.
GKP-2303
Mode
Single-phase two-wire
Floating output, the Lo terminal can be grounded.
Rated output voltage
100 V / 200 V
Voltage setting range
0.0 V to 155.0 V / 0.0 V to 310.0 V
Setting resolution
0.1 V
Voltage accuracy
*1
(1% of set + 0.6 V / 1.2 V)
Maximum current
*2
30 A /15 A
Maximum peak
current
*3
Peak value which is four times of the maximum current (Apk)
Power capacity
3 kVA
Load power factor
0 to 1 (phase lead or phase lag, 45 Hz to 65 Hz, external power
injection and regeneration are not available.)
Frequency setting
range
40 Hz to 550 Hz (AC mode)
1 Hz to 550 Hz (AC+DC mode)
Setting resolution
0.1 Hz
Frequency accuracy
0.01% of set (23 °C
5 °C)
Frequency stability
*4
0.005%
Voltage frequency
characteristic
*5
1%
Output waveform
sine wave, arbitrary wave (16 types), clipped sine wave (3 types)
Output on phase
0.0°
to 359.9° variable (setting resolution 0.1°)
Output off phase
0.0°
to 359.9° variable (setting resolution 0.1°, active/inactive
selectable)
DC offset *6
Within
20 mV (typ. fine adjustment available)
*1: In the case of 10 V to 150 V/20 V to 300 V, sine wave, no load, 45 Hz to 65 Hz, DC voltage
setting 0 V, 23 °C
5 °C.
*2: If the output voltage is higher than the rated value, this is limited (lowered) to satisfy the
power capacity. If there is the DC superimposition, the active current of AC+DC satisfies
the maximum current. In the case of 40 Hz or lower or 400 Hz or higher, and that the
ambient temperature is 40°C or higher, the maximum current may decrease.
*3: For the capacitor input type rectified load (crest factor=4), the rated output voltage, and 45
Hz to 65 Hz.
*4: For 45 Hz to 65 Hz, the rated output voltage, no load and the resistance load for the
maximum current, and the operating temperature.
*5: For 40 Hz to 550 Hz, sine wave, the rated output voltage, the resistance load for the
maximum current at 55 Hz, and 55 Hz reference.
*6: In the case of the AC mode and 23°C
5°C.
Summary of Contents for GKP-2302
