9.30 Safety and EMC
229
Gain
Phase
voltage
200
1
/
400
1
Phase
current
100
1
/
50
1
Accuracy
±5%
(no load on the monitor output, the rated output voltage, the resistance load at
the maximum current)
Output terminal
BNC connector (rear panel, unbalanced)
Output
impedance
600
Note: When you set the number of units by the power unit energization setting to 1, the
current gain doubles.
9.30
Safety and EMC
GKP-2302
Safety
Compliant with the following standard requirement.
EN 61010-1:2010
Pollution Degree 2
EMC
Compliant with the following standard requirement.
EN 61326-1:2006 (Group 1, Class A)
Note: Indication malfunction of LEDs and measured values may occur if the GKP-2302 is
exposed to a strong radiated radio frequency electromagnetic field or a strong radio
frequency conducted disturbance.
Note: This product may cause interference if used in residential areas. Such use must be
avoided unless the user takes special measures to reduce electromagnetic emissions to
prevent interference to the reception of radio and television broadcasts.
9.31
Operation Environment
GKP-2303
Operation
Environment
Indoor
Altitude
2000 m or lower
Operating
temperature/
humidity
0 °C to +50 °C, 5% to 85%RH
The absolute humidity should be 1 to 25 g/m
3
, without dew condensation.
On some specifications, the temperature range limit is more strict.
Storage
temperature/
humidity
-10 °C to +60 °C, 5% to 95%RH
The absolute humidity should be 1 to 29 g/m
3
, without dew condensation.
Figure 9-1 shows the ranges of the ambient temperature and the humidity.
Summary of Contents for GKP-2302
