Goodman [A/G]PG, Service Instructions Manual

installed,  operated

automatically lights the burners. Do not 
try to light the burners by hand.

10. Turn  on  all  electric  power  to  the

TO TURN OFF GAS TO APPLIANCE

other  flammable  vapors  and  liquids  in  the  vicinity  of  this

  Do  not  store  or  use  gasoline  or

4. Move the gas control switch or knob

follow the instructions "To Turn Off Gas

to "OFF". Do not force.

5. Replace control access panel.

To  Appliance"  and  call  your  service 

12. If  the  appliance  will  not  operate,

11. Set  the  thermostat  to  the  desired

technician or gas supplier.

FOR  YOUR  SAFETY

or  any  other  appliance.

GAS CONTROL

GAS CONTROL

3. Remove control access panel.

1. Set the thermostat to its lowest setting.

appliance if service is to be performed.

2. Turn off all electric power to the 

KNOB

SWITCH SHOWN 
IN "ON" POSITION

6. Move the gas control switch or knob

5. Remove control access panel.

SWITCH SHOWN 

IN "ON" POSITION

GAS CONTROL

to "OFF".

ON

OF

F

setting.

appliance.

B14933-247

cause cancer, birth
defects  or  other

known by the State of

cancer.

California  to  cause 

reproductive harm.
This product contains

Fiberglass  insulation

contains  a  chemical

fiberglass  insulation.

in  fuel  combustion

you  to  substances

death  or  serious

which  can  cause

State of California to

are  known  to  the

illness  and  which

accordance with the

and maintained in

instructions,  this
product could expose

manufacturer's

call  a  qualified  service  technician. 

will not operate, don't try  to  repair it, 

gas. If  you  then  smell  gas,  STOP!

gas, go to the next step.

8. Move the gas control switch or knob

above on this label. If  you  don't  smell

Follow  "B"  in  the  safety  information 

7. Wait five (5) minutes to clear out any

the control system and any gas control

the appliance and to replace any part of

a qualified service technician to inspect 

has been under water. Immediately call

D. Do not use this appliance if any part

tools. If the gas control switch or knob

control   switch  or  knob.  Never   use

C. Use only your hand to move the gas

which has been under water.

If you do not follow these instructions exactly, 

a fire or explosion may result causing property

If you cannot reach your gas supplier,

damage, personal injury or loss of life.

call the fire department.

FOR YOUR SAFETY READ BEFORE OPERATING

Force or attempted repair may result in

9. Replace control access panel.

try to light the burners by hand.

the gas suppliers instructions.

OPERATING INSTRUCTIONS

1. STOP! Read the safety information

2. Set the thermostat to lowest setting.

3. Turn off all electric power to the

4. This appliance is equipped with an 
automatic  ignition  system  which

appliance.

above on this label.

to "ON".

B. BEFORE OPERATING smell around

the appliance area for gas. Be sure to 
smell next to the floor because some gas

is heavier than air and will settle on the 

do not use any telephone in your

Do not touch any electric switch;

Do not try to light any appliance.

WHAT TO DO IF YOU SMELL GAS

from a neighbor's phone. Follow

Immediately call your gas supplier

building.

floor.

a fire or explosion.

A. This appliance does not have a pilot. It

is equipped with an ignition device which
automatically lights the burners. Do not

furnace. For assistance

the National Fuel Gas

WARNING:

If not 

Code, ANSI Z223.1.

installed in accordance

This furnace must be

of local codes, follow

instructions and local

with the manufacturers

codes. In the absence

consult a qualified

or the gas supplier.

installer, service agency

or  additional information

alteration, service or
maintenance  can
cause   injury   or

Refer to the user's
information manual
provided with this

property damage.

installation,  adjustment,

WARNING:

Improper

WARNING

!

This Package Gas Unit
is for outdoor installation
only.

LIGHTING INSTRUCTIONS