12
TIMER OPERATION
Push the TIMER ON button to set the auto-on time and the
TIMER OFF button to set the auto-off time.
1. To set the starting time:
A. Push the TIMER ON button; the remote control shows
TIMER ON, the last set time for the starting operation
and the signal "h" will be shown on the DIGITAL DIS-
PLAY area. You are now ready to reset the time to
START the operation.
B. Push the TIMER ON button again to set desired unit
start time.
C. After setting the TIMER ON, there will be a one-half
second delay before the remote control transmits the
signal to the air conditioner. After approximately an-
other 2 seconds, the signal "h" disappears and the set
temperature will reappear on the digital display.
2. To set the stopping time:
A. Push the TIMER OFF button and the remote control
will show TIMER OFF, the last set time for stopping
operation and the signal "h" will be shown on the DIGI-
TAL DISPLAY area. You are now ready to reset the
time of the STOP operation.
B. Push the TIMER OFF button again to set the time you
want to stop the operation.
C. After setting the TIMER OFF, there will be a one-half
second delay before the remote control transmits the
signal to the air conditioner. After approximately an-
other 2 seconds, the signal "h" disappears and the set
temperature will reappear on the digital display.
SET THE STARTING & STOPPING TIME
A. Push the TIMER ON button. The remote control will
show TIMER ON, the last set time for START operation
and the signal "h" will be shown on the DIGITAL dis-
play area. You are now ready to readjust the TIMER
ON to start the operation.
B. Push the TIMER ON button again to set the time you
want to start the operation.
C. Push the TIMER OFF button. The remote control will
show TIMER OFF, the last set time for STOP opera-
tion and the signal "h" will be shown on the DIGITAL
display area. You are now ready to reset the time to
STOP operation.
D. Press the TIMER OFF button again to set the time you
want to stop the operation.
E. After setting the TIMER, there will be a one-half second
delay before the remote control transmits the signal to
the air conditioner. After approximately another 2 sec-
onds, the signal "h" disappears and the set tempera-
ture will reappear on the digital display.
Changing the TIMER
•
To change the TIMER ON/OFF time, press the corre-
sponding TIMER button and reset the time.
•
To cancel the TIMER ON/OFF setting, adjust the TIMER
time to 0:00.
NOTE:
The time entered on this function is not the current,
real time. It is the time you want to program the unit to
automatically begin and end operation.
To receive the maximum performance from your unit, please
read and follow the following cautions.
•
Ensure there are no obstacles between the remote control and
the receiver of the indoor unit.
•Keep the remote control away from liquids.
•Do not expose the remote control to high temperatures or to
radiation.
•Keep the indoor received out of direct sunlight.
•Remote control should be kept away from EMI (electro-magnetic
interference) as is present in some household appliances.
© 2011 Goodman Manufacturing Company, L.P.
5151 San Felipe, Suite 500, Houston, TX 77056
www.goodmanmfg.com -or- www.amana-hac.com
Due to our commitment to continuing improvement, design and specifications are subject to change without prior notice.