-01- Press the MENU key [9] to see the Main Settings menu.
-02- Press key [14] to scroll the menu until you reach the “Set-up” function and confirm your choice by
pressing key [15]: the Set-up menu appears on the screen.
-03- With key [14] choose the “CH Table” function and with key [15 or 16] select the European country
you are in (the countries that are available are: “Italia”, “France”, “OIRT” (for East European coun-
tries) and “Europe” (for the other countries). This choice helps the television find the national
broadcast channels quickly and accurately during automatic tuning. (The country option list may
vary.)
-04- With key [14] choose the “Autostore” function and confirm your choice with key [15]: the
Autostore menu is displayed on the screen with the function “Start” already selected. If you do
not wish to proceed, return to Set-up by choosing the function “Cancel” with key [14] and confirm-
ing with key [15].
-05- If, instead, you do wish to start autostore of the channels, press key [15].The Busy... menu is dis-
played on the screen and the system starts searching. Each broadcasting station that is tuned in
is stored on the list and automatically associated to a programme number; “OK!” also appears
briefly.
When the list is complete, the Busy... menu disappears from the screen and the television shows
the pictures of the channel that, during search, was stored as programme 1.
–– Note: Once autostore has started it should be left to finish although it can be interrupted any time
by pressing key [22] or any other key on the remote.
When autostore is finished and if you want to reorder the stations found, changing, for instance, their
position in relation to the programme numbers assigned to them, proceed as explained further on in
paragraph 4.3 - HIDING, MOVING, DELETING, AND LOCKING# THE CHANNELS.
4.2 - MANUALLY FINDING AND STORING THE STATIONS
(Installation Menu)
If you want to tune the stations manually (one at a time), proceed as follows:
-01- Press key [9] to see the Main Settings menu.
-02- Press key [14] to scroll the menu until you reach
“Installation” and confirm your choice by pressing key
[15]: the Installation sub menu is displayed on the
screen.
-03- Press key [14] to scroll the menu until you reach the
“System” function and then, with key [15 or 16], choose
the broadcasting standard with which the sound/video
signal is transmitted by the broadcasting stations in your
country. For example choose PAL-BG for the Italian,
German stations, etc., SECAM-L for the French stations,
PAL-I for the British stations; NTSC for the American station, etc… . But if you have any doubts
choose the “Auto” option so that the television knows the standard automatically during the tuning
phase (ATTENTION: the only valid option for French stations is SECAM-L). In some cases though
the “Auto” option will not suffice and you will have to specify one of the above standards. The sys-
tem list may vary or be fixed to one system.
-04- Press key [13] to scroll the menu until you reach the “Channel Type” function. With key [15]
choose the “CH” option if you want to tune the traditional channels via the aerial or “S” for the
cable channels (only if you are connected to this service).
-05- Press key [13] to scroll the menu until you reach the “Programme” function and then set, with the
numerical key [21] on your remote, the number of the programme (two digits, from 01 to 99) you
want to store the station with.
–– Note: We advise leaving programme ‘0’ free because if you connect a videorecorder to the aerial
socket [M] on the television set (see also paragraph 6.3), programme ‘0’ will be used to store the signal
sent from this external source. See 'Tuning Tips' in the appendix at the end of this booklet for advice on
tuning in external equipment.
-06- Press key [14] to scroll the menu until you reach the “AFC” function and with key [15] select the
option “On”.
[9]
[13]
[16]
[15]
[14]
Please refer to key numbers illustrated on
the front fold-out REMOTE KEYS page.
MENU
ENGLISH - 11
Testo del man. SWING (UK) 14-10-2002 17:35 Pagina 11