2.6 - TUNING THE CHANNELS AND STORING THEM IN THE PRO-
GRAMMES
At this point, if you want to watch the programmes of a certain channel you have to tune in the CHAN-
NEL on which the programme will be broadcast and then store it in a PROGRAMME (choosing a num-
ber between 0 and 99).
To ensure programming is done correctly, read carefully through 'Part Four - Tuning and Programming',
which you will find further on in this manual.
2.7 - CALLING UP A STATION ON THE SCREEN
After you have programmed the channels, to recall a station (already tuned in and stored on a pro-
gramme) you can proceed in three different ways:
a)- Call up the programme number associated to the station on the remote control’s numerical keypad [21].
b)- scroll in sequence the numbers of the programmes using the keys [13 and 14] on the remote.
c)- select the Programme Change menu with key [C] and scroll the programmes using keys [D and E]
on the control panel.
2.8 - ADJUSTING VOLUME OF THE SOUND
To adjust the volume press the key [15 or 16] and the word “Volume” is displayed on the screen along
with an adjusting bar. You can turn the sound down with key [16] or up with key [15] on the remote. The
same thing can be done using keys [D and E] on the control panel.
2.9 - MUTING
You can mute the sound instantly by pressing key [4]: the word “Mute” is displayed on the screen. To get
the sound back simply press this same key again [4]. The word “Mute” disappears and the volume
returns to what it was previously.
2.10 - TO USE TELETEXT
If the channel you are tuned to broadcasts teletext, to see it press key [1] on the remote and then tap in
the number (three digits) of the page you want with the remote’s numerical keypad [21]. For a more
detailed explanation please go to the paragraph in the Appendix: TELETEXT service.
2.11 - SWITCHING THE TELEVISION OFF… to standby
By pressing key [12] on the remote the television switches off and goes into standby. The corresponding
indicator [B] lights up. In standby the television is ready to be switched on when wanted by simply
pressing any one key on the remote’s numerical keypad [21].
2.12 - SWITCHING THE TELEVISION OFF… automatically
The television has a safety system that, when there is no broadcasting signal (like for instance at night
when some channels close down), after about 15 minutes it switches off automatically and goes into
standby.
2.13 - SWITCHING THE TELEVISION OFF… definitely
To switch the television off definitely (interrupting the supply of electricity, at the end of the day for exam-
ple) simply press the main switch [A] on the television’s control panel. The luminous indicator [B] also
goes out meaning the television is off.
This operation, already recommended in paragraph 1.1 - PRECAUTIONS FOR SAFETY, besides saving
electricity, has the added advantage of switching the tube demagnetisation circuit back on.
–– Note: Besides the above ways to turn the television off, you can also set a 'sleep timer' to automati-
cally turn off the television after a set period. The details of this function are given in paragraph 7.1 -
PROGRAMMING AUTOMATIC SWITCH-OFF.
ENGLISH - 9
Testo del man. SWING (UK) 14-10-2002 9:41 Pagina 9
