The install menu lets you tune in broadcast channels and other equipment, automatically or manually, and
edit the list of stations stored under programme numbers. You can change the name given to a channel or
enter a name for a piece of equipment you have tuned in.
Select the install menu and select items
using the volume and PR buttons (see
'Menus for controlling and setting up the
television).
Remember, if you do not press a button
within 30 seconds, the menu will go off.
At any time, you can keep pressing the
MENU button to return to normal viewing.
Use the PR buttons to highlight a line in the menu.
Automatic tuning (ATSS)
The automatic tune, search and store process (ATSS) is described in 'Tuning in the programmes'.
Editing programmes
See this heading on page 13.
Manual tuning
•
Use manual tuning to tune in any extra piece of equipment that is connected by the aerial lead.
•
Manual tuning by frequency is very useful if you are trying to tune a non-standard frequency,
which some types of equipment might produce, for example an old video recorder or
analogue satellite receiver which has a simple output signal modulator with an adjustment
screw on the back.(This illustration shows a typical adjuster.) See ‘Tuning by frequency’
below.
Current programme number
Use this feature to check what has already been tuned in, or use a channel you have already tuned as a starting
point for manual tuning.
Use the PR buttons to highlight this line.
You can see the picture that goes
with the current programme
number as you change the number
with the volume buttons( ).
The install menu
10
INSTALL
ATSS GB
EDIT
SYSTEM GB
CHANNEL C55
FREQ 743.25
NAME BBC1
PROGRAM 01
STORE TO
01
V
Position
CB
Adjust
W
MENU Exit
OK Access
TV system selection by country
Broadcast channel number
Frequency
Channel name
Current programme number
Programme storage number
C H
A D J
Automatic tuning and sorting
system
Editing programmes
Country for automatic tuning.
Items in the dotted line are
described under ‘Manual tuning’.
The display you see may be
slightly different from this.
M
Press the menu button
Select ‘INSTALL’
Press the OK button
PR
PR
PR
PR
PR
PR
PR
PR
NORMAL/OK
PR
PR
PR
PR
PR
PR
