Goodmans 329944, User Manual

329944

Quick Setup

3

Fitting the Remote Batteries

1.  Remove the battery cover (as shown).
2.  Insert 2 x AAA batteries, taking note that the polarities 

match up.

3.  Replace the battery cover, in the same manner as you 

removed it.

 
Notes on battery usage

Do not insert battery into the remote control in the wrong 
direction.

Do not charge, heat, open or short-circuit the battery. 
Do not throw battery into a fire.

If the remote control does not function correctly or if the 
operating range becomes reduced, replace all batteries with 
new ones.

Improper replacement of batteries may result in explosive 
hazard. It must be replaced only by batteries with the same or 
equivalent type.

Connection to a TV

Before attempting to connect this unit to a TV, ensure that 
the portable DVD player and TV are both switched off.

1.  Insert the 3.5mm end of the supplied AV adapter cable 

into the AV OUTPUT socket (O) on the side of the unit.

2.  Connect the other ends of the adapter cable to an RCA 

AV cable (not supplied), as shown in the diagram.

 
Take note to match the colours when connecting.

3.  Red & white sockets carry audio and can be connected 

to the TV inputs or to an external amplifier.

4.  The yellow cable is the video cable and must be 

connected to the yellow video input on your TV.

5.  After tuning your TV to the correct input the playing 

content of the portable DVD player will appear on the TV 
screen. To disable the output on the TFT screen of 
portable DVD player press the TFT button (23) on the 
remote control.

6.  Press the TFT button (23) again to enable once more.

3.6

3.7

TV

3.5mm AV Cable

RCA AV Cable

DVD Player