Goodmans 355878, User Manual

13

3.6  Connect your DVD Player to an external source

1. 

Ensure that the DVD Player and the external 
source are both switched off and unplugged 
from the power supply.

2. 

Using the AV cable supplied, plug the single 
black plug into the AV IN socket (fig 3 

Q

) on 

the right hand side of the DVD player (fig 11).

3. 

Connect the 3 colour plugs on the other end of the AV cable to the 
matching colour AV sockets on the external source. E.g: Red plug to Red 
socket, Yellow plug to Yellow socket etc.

4. 

The video or audio playing on your external source can now be seen/heard 
on the portable DVD player

Note

: To turn off the display on your DVD Player, press the LCD ON/OFF button 

on the remote control. 

3.7  Power on/off using Mains power 

1. 

Connect the mains power lead into the DC 
socket on the right hand side of the DVD 
Player (fig12).

2. 

Check that the power switch on the right 
hand side of the DVD Player is in the OFF 
position. 

3. 

Plug the power adapter into the mains power 
wall socket and switch on. The red battery 
charging LED will turn on. When the battery 
is full charged this LED will change to be 
green. 

4. 

Slide the power switch on the right hand side of the DVD Player to the ON 
position. The Standby/Power on LED on the front right of your DVD player 
(to the right of the battery charging LED) will be green. 

Fig 11. 

External source ie; DVD Player

Fig 12. 

3.8  Power on/off using the In-car power adaptor

1. 

Check that the power switch on the right 
hand side of the DVD Player is in the OFF 
position. 

2. 

Plug the small end of the In-car power 
adapter into the DC socket on the right hand 
side of the DVD Player (fig 13).

3. 

Insert the 12V end into the 12V car power 
adapter socket. 

CAUTION

: 12 volts ONLY 

Note

: IMPORTANT, do NOT connect to a 24V car power adapter. Please check 

your car manual before making a connection.

4. 

Slide the power switch on the right hand side of the DVD Player to the ON 
position.

3.9  In-car headrest mount harness

Please use the car headrest mount accessory 
included to hold your Portable DVD Player to the 
back of a headrest.

1. 

Please follow the instructions in Section 3.4 
to rotate the display and fold it flat. 

2. 

Once flat, slide the portable DVD player into 
the headrest hardness with the display facing 
outwards. Use the Velcro tabs to secure the 
DVD player. 

3. 

Use the webbing straps to mount the 
harness to the rear of a headrest. Adjust the 
toggles to ensure that the harness and DVD 
player are held securely. 

Fig 13. 

Fig 14.