Goodmans 355878, User Manual

19

1. 

Press the SETUP button to display the 
SETUP menu options. 

2. 

Use the   Down and   Up buttons to 
move through the 4 Setup menu options 
screens. 

3. 

You can then use the   Right,   Left,   Up and   Down buttons to 
highlight each function or option and then press the OK button to confirm. 

6.2  TV system

Options of NTSC, PAL or AUTO are available for you to match to the type of 
DVD disc that you plan to watch. The AUTO setting is the default.

6.3  Power Resume 

There are two options available, ON or OFF. If you set the Resume feature to 
ON and you play a disc that you have played before, the disc will start from the 
place it was last stopped.

6.4  Screensaver

When your DVD player is not in use, the DVD logo can be used as a 
screensaver to help to prevent screen burn. You can choose to set this ON or 
OFF.

6.5  TV Type

The TV type option enables you to set the aspect ratio of the DVD Player to 
match to the connected TV. The following options are available:

•  4:3/PS (pan and scan)

•  4:3/LB (letter box)

•  16:9 (widescreen)

6. 

To go back to DVD mode, press the DVD/USB/SD button and use the   
left button to highlight DVD. Press the OK button. 

5.10  Programming (DVD) 

During DVD playback, you can program the order of the Chapter or Title that 
you watch. 

1. 

Press the PROG button. The program setting menu will be displayed. 

DVD (fig 15)  

2. 

Use the direction and numeric buttons to enter and set the desired Title or 
Chapter. 

3. 

After you have finished programming, use the direction buttons to highlight 
PLAY and then press the OK button. 

4. 

To reset the programmed entries and start again, use the direction buttons 
to highlight CLEAR and then press the OK button. 

6  System setup

6.1  System setup

The SETUP menu enables you to set your preferences for the different options 
available on your DVD Player. You can use the   Up,   Down,   Left and   
Right buttons to highlight each function or option and then press the OK button 
to confirm.

To move to the next set of Setup options after making changes, press the   
Left arrow, followed by the   down arrow.

Fig 15. 

T  C

T  C

5 -- :--

T  C

9 -- :--

T  C

13 -- :--

2 -- :-- 6 -- :-- 10 -- :-- 14 -- :--
3 -- :-- 7 -- :-- 11 -- :-- 15 -- :--
4 -- :-- 8 -- :-- 12 -- :-- 16 -- :--

PROGRAM

PLAY

CLEAR

1 -- :--

SYSTEM SETUP

TV System

POWER RESUME

Screen saver

TV Type

Password

Rating

Default

Fig 16.